Quality Technician- 1st Shift

Principal Function:1. Participation in TIER 1 of the Production Area or Line in charge. Must participate in TIER 2 if required by your Supervisor. 2. Inspection and formal report via email of the most recurrent non-conforming components and/or subcomponents to the team. 3. Inspection, containment and identification of the root cause and proposals for solutions to the rejection reports issued in FAS by Quality Inspectors. 4. Maintain control of Non-Conforming Material in the MNC Cage. Implementation of MRB Process. 5. Provide support in Final Inspection when required. 6. Development of process improvements such as (Update of Check List, creation of Visual Aids and/or Internal Quality Alerts and team events like Fixtures, templates, improvement of methods, etc) 7. Comply with Quality Audits (LPA) via Benchmark. 8. Follow safety, standards and quality rules, the policies and procedures established by the company.Key Responsibilities:1. Actively participate in meetings with department staff to discuss operational and/or administrative aspects of the company. TIER 1 (Report of Rejections of the previous day / Final Yield vs Objective) Root cause and proposal of solutions to eliminate, reduce and/or detect the most recurrent problems. TIER 2 (Report of Non-Conforming Material in the Production Line that do not meet product specifications and Quality standards, impacting FTY and/or product characteristics outputs) SCRAP. 2. MNC (Identify and report any Non-Conforming Material identified in the production line via email providing all evidence, either to "Feeders or BO" involving the Quality Staff of Suppliers. Provide support in the segregation of Non-Conforming Material preferably its transfer to the Non-Conforming Material shelves. 3. FAS (Inspect the current inventory to determine if the problem is isolated or systemic, also go to the process or area where the error or defect arose to Identify possible root causes and propose in team "Included certified regular employee" possible solutions. Document the results of product and/or process audits following the formats established by the company. 4. MRB (Maintain and identify the Control of Non-Conforming Material in the MNC shelves. Specifically complying with the MRB process (Physical versus Electronic Inventory, Waiting time of MNC in the shelves. Additional handling and organization of the area. 5. Inspect and document critical dimensional and cosmetic characteristics following corporate standards, product specifications and/or established deviations "finished product and/or sub-assembly" (Includes visual inspections) Provide support to the Quality Inspector if required by the supervisor. 6. Use precision and measurement instruments to verify parts and their components. Ensure conformity of measurement and test instruments following the parameters of the Calibration Program. 7. Comply with established norms and procedures to health, safety and environment. Notify the immediate supervisor of any deviation or abnormality detected vs. the quality standards established by the company. 8. Keep inspection files updated following the procedures established by the company. 9. Comply with the norms, policies and procedures established to Health, Safety and Environment, the Rules and Quality Policy, as well as by the Human Resources Department, and the company. 10. Carry out transactions related to inventory following the established procedures. 11. Refer to the immediate supervisor or designated personnel any abnormality in the product or process. 12. Keep work areas clean and notify unsafe conditions that may affect employee safety. 13. Ensure safety in the work area and ensure compliance with established norms and procedures. 14. Any other assigned task.Qualifications:Education/Experience/Certifications or Licenses:• Associate Degree (completed) and/or Technical Degree (completed). Preferable in Quality, Mechanical, Electrical, Electronics, Industrial Engineering, Mechanical, Electrical and/or Chemical or Business Administration. Minimum 2 years of experience in manufacturing and/or quality process controls, knowledge and handling in technical functions in measurement and inspection using equipment such as 'caliper', micrometer, CMM, optical comparator, 'spring tester', 'foster tester', among others; evaluation of non-conforming material, data collection and simple analysis of measurement results.Skills:Competencies/Knowledge:• Intermediate level English. Read and write – intermediate level. Knowledge to read and interpret schematics. Knowledge tied to quality and ISO9001. Intermediate level statistics knowledge. Ability to manage Windows operating system. Capacity to interpret and read blueprints. Knowledge in multiple operational processes. Knowledge in intermediate level mathematics. Basic calibration knowledge. Knowledge in product inspection and/or processes at intermediate level. Technical knowledge in health and safety. Knowledge in audits. Ability to plan daily tasks.To execute this job efficiently, the candidate must be able to perform all essential functions of the position. The requirements listed in the document are representative of the knowledge, skills and abilities required for the position. Reasonable accommodation may be made for candidates who have physical and/or mental impairments but who can perform the essential functions of the position, with or without reasonable accommodation. Eaton Corporation reserves the right to change and/or modify this document at any time.Eaton Corporation is a company with an Affirmative Action and Equal Employment Opportunity Program in PR